Additional information

Child override
  • Rapid break down of Fats, Oils and Grease.
  • Liquefies FOG solids, assuring quick and easy pumping.
  • Provides reductions in final effluent BOD, COD, and TSS.
  • Reduces and controls system odour.
  • What to Expect from DGTT

    1. Reduction in solids
    2. Clean pipes and no fat buildup or pipe clogging
    3. Unclogging outflow water to leach drains
    4. Fat digestion
    5. Greatly reduces odours
    6. Reduces the need for pump-outs and easier to
      pump
    Child override
  • Use at 5 to 20/ppm, based on daily flow or system volume.
  • For enhanced performance treat undiluted directly into grease trap.
  • Add directly to the inlet of the system being treated.
  • EVERY WASTEWATER SYSTEM IS DIFFERENT

    Sometimes greasetraps or septic systems can be grossly undersized for the volume they are expected to process.  This could be due to the fact that the original system was designed for a much smaller loading than what it currently receives.  Another cause for failure can be too much food waste entering the drains when it should be scraped off into the rubbish bin.

    This all makes it difficult to recommend a guaranteed dosing program based simply on the size of your greasetrap or septic tank.  Contact Parklink today to discuss your situation with one of the team and ensure you’re dosing the correct amount and the correct product.

    Child override

    DGTT Brochure

    DGTT Label

    Benefits

  • Rapid break down of Fats, Oils and Grease.
  • Liquefies FOG solids, assuring quick and easy pumping.
  • Provides reductions in final effluent BOD, COD, and TSS.
  • Reduces and controls system odour.
  • What to Expect from DGTT

    1. Reduction in solids
    2. Clean pipes and no fat buildup or pipe clogging
    3. Unclogging outflow water to leach drains
    4. Fat digestion
    5. Greatly reduces odours
    6. Reduces the need for pump-outs and easier to
      pump

    Directions

  • Use at 5 to 20/ppm, based on daily flow or system volume.
  • For enhanced performance treat undiluted directly into grease trap.
  • Add directly to the inlet of the system being treated.
  • EVERY WASTEWATER SYSTEM IS DIFFERENT

    Sometimes greasetraps or septic systems can be grossly undersized for the volume they are expected to process.  This could be due to the fact that the original system was designed for a much smaller loading than what it currently receives.  Another cause for failure can be too much food waste entering the drains when it should be scraped off into the rubbish bin.

    This all makes it difficult to recommend a guaranteed dosing program based simply on the size of your greasetrap or septic tank.  Contact Parklink today to discuss your situation with one of the team and ensure you’re dosing the correct amount and the correct product.

    Downloads

    DGTT Brochure

    DGTT Label

    Reviews

    There are no reviews yet.

    Be the first to review “DGTT”

    Your email address will not be published. Required fields are marked *